Your position: Home > CNC Accessories
- Description
Feature:
1. Single‑phase or 3‑phase 110V input, three‑phase 110v output, frequency 0‑50hz / 60hz, 0‑400hz.2. If you have no experience in driving a VFD, please refer to the instructions before operating the VFD.
3. Simple to use, just connect /L2 to any two of VFD input R/S/T.
4. Used in conjunction with the for Mach 3 controller, it can be used as a motor control and phase converter.
5. This product can use sine waving PWN (SPWM) for the control system
Specification:
Item Type: Single Phase Inverter
Material: ABS
Model: HY01D511B-T
Input Voltage: Single-phase 110V
Output Voltage: Three-phase 220V
Matching Motor Power: 1.5KW
Control Way | SPWM | |
Input power | 110V power supply: 100-120V | |
5-digit digital display and status indicator | Display frequency, current, , voltage, counter, temperature, forward and reverse status, fault, etc. | |
Communication control | RS-485 | |
Operating temperature | -10~40℃ | |
humidity | 0~95% relative humidity (no condensation) | |
vibration | Below 0.5G | |
Frequency control | Range | 0.10~400.00Hz |
Accuracy | Digital type: 0.01% (-10-40℃); analog type: 0.1% (25±10℃) | |
Set the resolution | Digital: 0.01Hz; Analog: 1% of the maximum operating frequency | |
Output resolution | 0.01Hz | |
Keyboard setting method | Can be set directly with←∧∨ | |
Analog setting method | External voltage 0-5V, 0-10V, 4-20mA, 0-20mA. | |
Other functions | Frequency lower limit, start frequency, stop frequency, three frequencies can be set separately | |
General control | Acceleration and deceleration control | Acceleration and deceleration time (0.1-6500 seconds) arbitrary choice |
V/F curve | V/F curve can be set arbitrarily | |
Torsion control | The torsion can be set to increase, the maximum 10.0% start torsion can 150% at 1.0Hz | |
Multi-function input | 6 multi-function input terminals, realize 8-stage control, program operation, 4-stage acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop and other functions | |
Multi-function output | There are 5 multi-function output terminals, which can realize the indication and alarm of running, zero , counter, external abnormality, program running, etc. | |
Other functions | Automatic voltage regulation (AVR), deceleration stop or free stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, traverse control, adjustable carrier, up to 20KHz, etc. | |
Protective function | Overload protection | Electronic relay to protect the motor, driver (constant rotation short 150%/1 minute, fan 120%/1 minute) |
FUSE protection | FUSE melts new, the motor stops | |
Overvoltage | 220V line: DC voltage> 400V; 380V line: DC voltage> 800V | |
Undervoltage | 220V line: DC voltage <200V; 380V line: DC voltage <400V | |
Restart after instantaneous power failure | After Shun stops, it can be restarted in frequency tracking mode | |
Stall prevention | Stall prevention during acceleration/deceleration operation | |
Short circuit at output | Electronic circuit protection | |
Other functions | Heat sink overheating protection, reverse rotation limit, function parameter lock for direct start after power-on and fault recovery, etc. |
Package List:
1 x Single-Phase Inverter1 x User Manual
Note:
1.This VFD is applicable to three phase 110V asynchronous motor2.Dont support external resistor(the function needs to be customized by notifying the seller before purchase).
3.Fan runs all the time even though the motor stop.
4.If your motor is 50/60hz, you need to change the parameter of the VFD to be consistent with the motor
Production lead time: 7 days
Huanyang Inverter User Manual