0456 SPINDLE ALARM of GSK218MC
Paycnc.com - PAY for CNC components
Information
Tech Support
FAQ
0456 SPINDLE ALARM of GSK218MC
GSK218MC-H User:
1-      If turn Spindle driver on:
 
ALARM MESSAGE
                SERVO ALARMS: 0456
                    Spindle driver alarm.
 
2-      If turn xyz driver off
ALARM MESSAGE
                SERVO ALARMS: 0453
                    Z axis driver alarm.
SERVO ALARMS: 0452
                    y axis driver alarm.
SERVO ALARMS: 0451
                    x axis driver alarm.
 
CNCmakers Support:
 
If the Parameter 19.5 change to 1, the alarm still there.
You can change the Parameter 61.3 to 1, to remove the alarm and try.

 
For the XYZ servos, the alarm means there is no signal feedback from the drivers to CNC system.
Please kindly check if there is any wiring problem between the drivers and CNC?
Or you can disconnect two drivers among them and see if the only one can work or not?

 
You could also try to rotate the motor, if it can be rotate means no enable signal there.
TOP
Message Us