Cincinnati milacron arrow 750 CNC Retrofit
Dear CNCmakers,
- Please quote the cost of a retro fit package for a Cincinnati Arrow 750 machine.
- What warranty do you provide?
- Cost of shipping to the UK?
- Do you have a representative in the UK or close by in Europe?
- Is there a possibility of making the CNC retrofit 1 phase electric (230v 50Hz AC)?
Also please state the axis motor sizes and the control you would recommend. The Z axis on this model was too weak from the manufacturers when the machine was new so I would like to ensure the Z axis is very powerful.
I generally program the machine via a CAM system, so communication between my PC network and the control must be good.
CNCmakers Support:
Thanks for your email, following you may find our answers as requested.
1- Please refer to attached proforma invoice.
2- One year.
3- $148 by sea shipping.
4- We have no representative in the UK or close by in Europe.
5- We have no 1 phase option, only 3 phase, is 415V/3phase input power available there?
6- Following you may find CNC retrofit package for Cincinnati Arrow 750 as requested:
218MC-H Machining Center Controller 1 set
(CNC controller for milling machine with 3 axis simultaneously plus 1 spindle)
AC Servo Motor with Driver for X and Y axis 6NM 2 sets
(Servo Motor+driver+cables+connectors ,1.5KW,6Nm,2500rpm,7A,130m m Support)
AC Servo Motor with Driver for Z axis 7.5NM 1 set
(Servo Motor+Brake+driver+cables+conn ectors,1.88KW,7.5Nm,2500rpm,7.5A, 175mm Support)
AC Servo Spindle Motor with Driver 7.5KW 1 set
(Servo Spindle Motor-driver+cables+connectors ,7.5KW, max. 7000rpm)
All Cables(6 meters), Software & Manuals 1set
7- Here we use Master CAM, the communication between my PC network and the control is good.