USD
GSK928TEII Spindle Speed Problem
Bolton Tools Lathe with GSK928TEII User:
I have a lathe that has a GSK928TEII controller.
The lathe is imported through Bolton Tools.
I need technical help.
I am using the controller to set spindle speed.
When I set the spindle speed to 2000 rpm, the actual speed will be 1020 rpm about half of what it is set at.
I have looked through the parameters P11 and P12 I believe everything is set right.
What would change the spindle speed to be off by half?
CNCmakers Support:
You can set the maximum frequency of the spindle inverter to match.
