USD
GSK983Ma 423 Alarm with new replaced DA98B-20
The position deviation value of axis Y exceeds +-327687...
Speed instruction value of DA converter is beyond +81...
Dear Sir,
Kindly, we had error 14 on drive DA98B-20 of Y axis, on another cnc machine.
So, we replaced the drive by a new one, and entered the parameters as in the old drive.
But when we try to run the Y axis, we have alarm 423 on the cnc screen.
What could be the problem?
The old drive parameters are:
Pa01 = 88
Pa05 = 400
Pa06 = 6
Pa07 = 1000
Pa09 = 35
Pa11 = 100
Pa19 = 1
Pa20 = 1
Pa21 = 30
Pa22 = 1
Pa23 = 2500
Pa24 = 100
Pa25 = -50
Pa26 = 200
Pa27 = -300
Pa28 = 500
Pa29 = 2500
Pa30 = 1
Pa32 = 0
Pa36 = 100
Pa37 = -100
Pa38 = 100
(other parameters are as factory setting)
CNCmakers Support:
New DA98B-20 install on GSK983Ma, need to change PA4=1
