Video on Youtue

This tool setting operation is fully compatible with the GSK218MC-H cnc controller on cnc milling machine.

Spindle Start: Press the PRG and MDI keys, input M03S500, then press EOB and start. The spindle will rotate forward.

X-axis Tool Setting: Use the handwheel to move the milling cutter to the left and right end faces of the workpiece. On the POS page, press X, 0, and input respectively. Finally, use the handwheel to return the X-axis value to zero.

Y-axis Tool Setting: Use the handwheel to move the milling cutter to the front and rear end faces of the workpiece. On the POS page, press Y, 0, and input respectively. Finally, use the handwheel to return the Y-axis value to zero.

Z-axis Tool Setting: Use the handwheel to move the bottom face of the milling cutter to the top face of the workpiece. On the POS page, press Z, 0, and input.

Parameter Confirmation: Enter the settings page, move the cursor to the X, Y, and Z axis workpiece coordinates sequentially, and press the corresponding axis key and input respectively. Once the entire operation is completed, the tool setting can be completed with the four sides centered and the top surface set to zero.

Paycnc offers all kinds of GSK CNC controllers
If you could not find the exact model, you can send item photos and its nameplate to paycnc@paycnc.com or WhatsApp to get quotation.