Spindle motor runs as soon as machine power on
Paycnc.com - PAY for CNC components
Information
Tech Support
FAQ
Spindle motor runs as soon as machine power on
Spindle motor runs as soon as machine power on
 
The Spindle motor start to run as soon as turn on the CNC machine power, with any key pressing or G code command.
 
Normally this problem need to check below:
  1.       Could be the IC2803 inside the CNC controller breakdown.
Solution: change the IC2803 or change the CPU board of the CNC controller.
 
  1.       Relay or contact terminal of the contactor stuck.
Solution: change the relay or contactor.
 
  1.       Wrong wiring.
Solution: Check the wiring and correct it.
 
TOP
Message Us