Spindle one full revolution 360 degrees
User:
I would get when the spindle turns one full revolution, corresponding to 360 degrees.
1 turn = 360 degrees.
That parameter should change?
Gsk 980tdc controller
Gs3000 spindle driver motor
CNCmakers Support:
When the system shows 3 digits after the decimal point, for example: 90.000
And the encoder is 1024 lines
Please set PA29=64 PA30=5625
When the system shows 2 digits after the decimal point, for example: 90.00
And the encoder is 1024 lines
Please set PA29=640 PA30=5625