Number of control axes

Maximum number of control axes: 6 axes

Maximum number of linkage axes: 3 axes

Number of PLC control axes: 6 axes

Number of CS contour control axes: 6 axes

Coordinate value (system) And size

Workpiece coordinate system (G50), local coordinate system, machine tool coordinate system, workpiece coordinate system 1 ~ 6 (g54~ G59)

Coordinate plane selection

Absolute / incremental programming, diameter / radius programming, polar coordinates, English / metric conversion, linear axis /rotary axis

Preparation function

Including rapid positioning, linear interpolation, circular interpolation (spiral interpolation), cylindrical interpolation, thread cutting, polar interpolation, rigid tapping, polygon turning, pause, tool compensation, workpiece coordinate system, local coordinate system, macro program call, jump, single fixed cycle and composite fixed cycle, etc

Feed function

Fast moving speed: 0 m / min ~ 100 m / min (& mu; level), 0 m / min ~ 60 m / min (0.1 & mu; level)

Fast magnification: F0, 25%, 50% and 100% four levels of real-time adjustment

Cutting feed speed: 0 m / min ~ 60 m / min (& mu; level), 0 m / min ~ 24 m / min (0.1 & mu; level)

Feed rate: 0 ~ 150%, 16 levels in total, real-time adjustment

Rapid movement / cutting feed acceleration and deceleration: linear type. The starting speed, ending speed and acceleration and deceleration time of acceleration and deceleration are set by parameters

Online Servo Automatic Tuning

Thread cutting

Thread type: equal pitch straight thread / tapered thread / end face thread, variable pitch straight thread / tapered thread / end face thread

Number of thread heads: 1 ~ 99

Thread pitch: 0.01mm ~ 500mm (metric thread) or 0.01inch ~ 9.99inch (British thread)

Acceleration and deceleration of thread cutting: linear type and exponential type are optional. The starting speed, ending speed and acceleration and deceleration time of acceleration and deceleration are set by parameters

Thread tailing: high speed tailing processing, tailing length, angle and speed characteristics can be set

Spindle function

Spindle speed: it can be given by s code or PLC signal, and the speed range is 0RPM ~ 20000rpm

Spindle magnification: 50% ~ 150%, 11 levels of real-time repair and adjustment in total

Spindle constant linear speed control

CS axis control 

Tool function

Tool length compensation (tool offset): 99 groups

Tool wear compensation: 99 groups of tool wear compensation data

Tip radius compensation (type C)

Tool deviation execution mode: modify coordinate mode and tool movement mode

Tool life management: tool life can be managed according to time or times

Auxiliary function

Special m codes (M00, M01, M02, M30, M98, M99), and other m codes are defined by PLC

Support multiple M code segments

PLC function

Two level PLC program, 5000 steps at most, and the refresh cycle of level 1 program is 8ms

13 basic commands and 30 functional commands

PLC ladder diagram online editing and real-time monitoring

Support multiple PLC programs (up to 16), and the currently running PLC program can be selected

Local I / O: 8 inputs

I/Ounit：IOL-02T（DI48/DO32）、IOL-02F（DI48/DO32）、IOL-03F（DI72/DO48）

Operation panel I / O: 112 input / 96 output

Program storage and editing

Program capacity: 36m, 10000 programs (including subroutines and macro programs)

Editing method: full screen editing, supporting part program background editing

Editing functions: program / program segment / word retrieval, modification and deletion, block copy / block deletion

Program format: two sets of G code instructions are optional, no space between instruction words is supported, and mixed programming of relative coordinates and absolute coordinates is supported

Program call: support macro program call with parameters and 12 level subroutine nesting

Program check function

Syntax check, trajectory preview, graphic simulation, idle operation, machine tool locking, auxiliary function locking, single-stage operation

Simplify programming functions

Single fixed cycle, compound fixed cycle, drilling / boring cycle, rigid tapping, direct input of drawing size, automatic chamfering, statement macro programming, blueprint programming, programming wizard, auxiliary programming and teaching

Compensation function

Reverse clearance compensation: compensation range (- 9999 ~ + 9999) × Detection unit

Memory pitch error compensation: there are 1024 compensation points in total. The compensation points of each axis are set by parameters, and the compensation range of each point is (- 700 ~ + 700) × Detection unit

interface

8.4 inches / 10.4 inches

Support Chinese, English, Russian and other languages

Location, program, system, settings, graphics, information, help

Operation management

Operation mode: automatic, manual, edit, input, DNC, handwheel, back to reference point

Level 6 operation authority management

32 time limited shutdown

Program switch, parameter switch

Communication function

USB: USB disk file operation, direct processing of USB disk files, and support PLC program and system software USB disk upgrade

LAN: remote monitoring, network DNC processing, supporting file transmission of part program, PLC program, system parameters, servo configuration parameters, etc

Safety function

Emergency stop, hardware travel limit, multiple stored travel checks, shaft interlock, data backup and recovery

Electrical interface

operation panel: 1 host 0 communication interface, 1 power interface (DC24V input), 1 hand pulse interface, 1 handheld box interface, 1 input terminal (8-point input), 1 output terminal (4-point output)

host: 1 pair of GSK link bus communication interface, 1 power interface (DC24V input), 2 encoder interfaces, 1 machine tool operation panel communication interface, 1 usb-h (front), 1 LAN interface, 1 high-speed input terminal (8-point input)